Datasheet
MSP430F532x
SLAS678D –AUGUST 2010–REVISED FEBRUARY 2013
www.ti.com
PMM, SVM High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVMHE = 0, DV
CC
= 3.6 V 0 nA
I
(SVMH)
SVM
H
current consumption SVMHE = 1, DV
CC
= 3.6 V, SVMHFP = 0 200 nA
SVMHE = 1, DV
CC
= 3.6 V, SVMHFP = 1 1.5 µA
SVMHE = 1, SVSMHRRL = 0 1.62 1.74 1.85
SVMHE = 1, SVSMHRRL = 1 1.88 1.94 2.07
SVMHE = 1, SVSMHRRL = 2 2.07 2.14 2.28
SVMHE = 1, SVSMHRRL = 3 2.20 2.30 2.42
V
(SVMH)
SVM
H
on or off voltage level
(1)
SVMHE = 1, SVSMHRRL = 4 2.32 2.40 2.55 V
SVMHE = 1, SVSMHRRL = 5 2.52 2.70 2.88
SVMHE = 1, SVSMHRRL = 6 2.90 3.10 3.23
SVMHE = 1, SVSMHRRL = 7 2.90 3.10 3.23
SVMHE = 1, SVMHOVPE = 1 3.75
SVMHE = 1, dV
DVCC
/dt = 10 mV/µs,
2.5
SVMHFP = 1
t
pd(SVMH)
SVM
H
propagation delay µs
SVMHE = 1, dV
DVCC
/dt = 1 mV/µs,
20
SVMHFP = 0
SVMHE = 0 → 1, dV
DVCC
/dt = 10 mV/µs,
12.5
SVMHFP = 1
t
(SVMH)
SVM
H
on or off delay time µs
SVMHE = 0 → 1, dV
DVCC
/dt = 1 mV/µs,
100
SVMHFP = 0
(1) The SVM
H
settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) on recommended settings and usage.
PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVSLE = 0, PMMCOREV = 2 0 nA
I
(SVSL)
SVS
L
current consumption SVSLE = 1, PMMCOREV = 2, SVSLFP = 0 200 nA
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1 1.5 µA
SVSLE = 1, dV
CORE
/dt = 10 mV/µs, SVSLFP = 1 2.5
t
pd(SVSL)
SVS
L
propagation delay µs
SVSLE = 1, dV
CORE
/dt = 1 mV/µs, SVSLFP = 0 20
SVSLE = 0 → 1, dV
CORE
/dt = 10 mV/µs, SVSLFP = 1 12.5
t
(SVSL)
SVS
L
on or off delay time µs
SVSLE = 0 → 1, dV
CORE
/dt = 1 mV/µs, SVSLFP = 0 100
PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVMLE = 0, PMMCOREV = 2 0 nA
I
(SVML)
SVM
L
current consumption SVMLE = 1, PMMCOREV = 2, SVMLFP = 0 200 nA
SVMLE = 1, PMMCOREV = 2, SVMLFP = 1 1.5 µA
SVMLE = 1, dV
CORE
/dt = 10 mV/µs, SVMLFP = 1 2.5
t
pd(SVML)
SVM
L
propagation delay µs
SVMLE = 1, dV
CORE
/dt = 1 mV/µs, SVMLFP = 0 20
SVMLE = 0 → 1, dV
CORE
/dt = 10 mV/µs, SVMLFP = 1 12.5
t
(SVML)
SVM
L
on or off delay time µs
SVMLE = 0 → 1, dV
CORE
/dt = 1 mV/µs, SVMLFP = 0 100
54 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated