Datasheet

MSP430F5310, MSP430F5309
MSP430F5308, MSP430F5304
www.ti.com SLAS677E –SEPTEMBER 2010–REVISED NOVEMBER 2013
PMM, SVS High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVSHE = 0, DV
CC
= 3.6 V 0
nA
I
(SVSH)
SVS current consumption SVSHE = 1, DV
CC
= 3.6 V, SVSHFP = 0 200
SVSHE = 1, DV
CC
= 3.6 V, SVSHFP = 1 1.5 µA
SVSHE = 1, SVSHRVL = 0 1.57 1.68 1.78
SVSHE = 1, SVSHRVL = 1 1.79 1.88 1.98
V
(SVSH_IT–)
SVS
H
on voltage level
(1)
V
SVSHE = 1, SVSHRVL = 2 1.98 2.08 2.21
SVSHE = 1, SVSHRVL = 3 2.10 2.18 2.31
SVSHE = 1, SVSMHRRL = 0 1.62 1.74 1.85
SVSHE = 1, SVSMHRRL = 1 1.88 1.94 2.07
SVSHE = 1, SVSMHRRL = 2 2.07 2.14 2.28
SVSHE = 1, SVSMHRRL = 3 2.20 2.30 2.42
V
(SVSH_IT+)
SVS
H
off voltage level
(1)
V
SVSHE = 1, SVSMHRRL = 4 2.32 2.40 2.55
SVSHE = 1, SVSMHRRL = 5 2.52 2.70 2.88
SVSHE = 1, SVSMHRRL = 6 2.90 3.10 3.23
SVSHE = 1, SVSMHRRL = 7 2.90 3.10 3.23
SVSHE = 1, dV
DVCC
/dt = 10 mV/µs,
2.5
SVSHFP = 1
t
pd(SVSH)
SVS
H
propagation delay µs
SVSHE = 1, dV
DVCC
/dt = 1 mV/µs,
20
SVSHFP = 0
SVSHE = 0 → 1
12.5
SVSHFP = 1
t
(SVSH)
SVS
H
on or off delay time µs
SVSHE = 0 → 1
100
SVSHFP = 0
dV
DVCC
/dt DV
CC
rise time 0 1000 V/s
(1) The SVS
H
settings that are available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply
Voltage Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) for recommended settings and use.
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 55
Product Folder Links: MSP430F5310 MSP430F5309 MSP430F5308 MSP430F5304