Datasheet

MSP430F5310, MSP430F5309
MSP430F5308, MSP430F5304
SLAS677E –SEPTEMBER 2010–REVISED NOVEMBER 2013 www.ti.com
PMM, Brown-Out Reset (BOR)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
BOR
H
on voltage,
V(DV
CC
_BOR_IT–) | dDV
CC
/d
t
| < 3 V/s 1.45 V
DV
CC
falling level
BOR
H
off voltage,
V(DV
CC
_BOR_IT+) | dDV
CC
/d
t
| < 3 V/s 0.80 1.30 1.50 V
DV
CC
rising level
V(DV
CC
_BOR_hys) BOR
H
hysteresis 60 250 mV
Pulse duration required at RST/NMI
t
RESET
2 µs
pin to accept a reset
PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Core voltage, active mode,
V
CORE3
(AM) 2.4 V ≤ DV
CC
≤ 3.6 V 1.90 V
PMMCOREV = 3
Core voltage, active mode,
V
CORE2
(AM) 2.2 V ≤ DV
CC
≤ 3.6 V 1.80 V
PMMCOREV = 2
Core voltage, active mode,
V
CORE1
(AM) 2.0 V ≤ DV
CC
≤ 3.6 V 1.60 V
PMMCOREV = 1
Core voltage, active mode,
V
CORE0
(AM) 1.8 V ≤ DV
CC
≤ 3.6 V 1.40 V
PMMCOREV = 0
Core voltage, low-current mode,
V
CORE3
(LPM) 2.4 V ≤ DV
CC
≤ 3.6 V 1.94 V
PMMCOREV = 3
Core voltage, low-current mode,
V
CORE2
(LPM) 2.2 V ≤ DV
CC
≤ 3.6 V 1.84 V
PMMCOREV = 2
Core voltage, low-current mode,
V
CORE1
(LPM) 2.0 V ≤ DV
CC
≤ 3.6 V 1.64 V
PMMCOREV = 1
Core voltage, low-current mode,
V
CORE0
(LPM) 1.8 V ≤ DV
CC
≤ 3.6 V 1.44 V
PMMCOREV = 0
54 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: MSP430F5310 MSP430F5309 MSP430F5308 MSP430F5304