Datasheet

MSP430F5172, MSP430F5152, MSP430F5132
MSP430F5171, MSP430F5151, MSP430F5131
www.ti.com SLAS619J –AUGUST 2010–REVISED OCTOBER 2013
Table 3. Terminal Functions (continued)
TERMINAL
NO. I/O
(1)
DESCRIPTION
NAME
RSB DA YFF
General-purpose digital I/O
P3.5/
TA0 CCR2 compare output/capture input
PM_TA0.2/
Analog input A8 – 10-bit ADC
(4)
A8
(4)
34 37 D1 I/O
Positive terminal for the ADC's reference voltage for an external applied reference
VEREF+/
voltage
CB12
Comparator_B Input 12
General-purpose digital I/O
P3.6/
TA0 CCR1 compare output/capture input
PM_TA0.1/
Analog input A7 – 10-bit ADC
(4)
A7
(4)
/ 35 38 C1 I/O
Negative terminal for the ADC's reference voltage for an external applied reference
VEREF-/
voltage
CB11
Comparator_B Input 11
P3.7/ General-purpose digital I/O
PM_TA0.0/ TA0 CCR0 compare output/capture input
36 - C2 I/O
A6
(4)
/ Analog input A6 – 10-bit ADC
(4)
CB10 Comparator_B Input 10
AVCC 37 1 D3 Analog power supply
PJ.4/ General-purpose digital I/O
38 2 B1 I/O
XOUT Output terminal of crystal oscillator
PJ.5/ General-purpose digital I/O
39 3 A1 I/O
XIN Input terminal for crystal oscillator
AVSS 40 4 C3 Analog ground supply
QFN pad - NA NA Recommended to connect to DVSS externally
(4) The ADC10_A module is available on MSP430F51x2 devices. The secondary pin functions Ax (ADC10_A channel x) available only in
MSP430F51x2 devices.
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: MSP430F5172 MSP430F5152 MSP430F5132 MSP430F5171 MSP430F5151 MSP430F5131