Datasheet

MSP430F5172, MSP430F5152, MSP430F5132
MSP430F5171, MSP430F5151, MSP430F5131
SLAS619J –AUGUST 2010–REVISED OCTOBER 2013 www.ti.com
REVISION HISTORY
REVISION COMMENTS
SLAS619 Product Preview release
SLAS619A Production Data release
SLAS619B Changed Table 7.
SLAS619C Changed Comparator_B V
REF
MAX from ±1% to ±1.5% for all test conditions in Comparator_B.
SLAS619D
Table 1, Corrected number of I/Os for all entries.
Functional Block Diagram, MSP430F51x2 and Functional Block Diagram, MSP430F51x1, Corrected typo on P2 port
name.
Recommended Operating Conditions, Corrected typo in f
SYSTEM
V
CC
conditions on VCORE = 3 row.
PMM, Brown-Out Reset (BOR), Changed parameter descriptions for V
(DVCC_BOR_IT-)
and V
(VCORE_BOR_IT-)
.
SLAS619E
Table 10, changed "SYSRSTIV, System Reset" interrupt event at offset 1Ch to Reserved.
Low-Power Mode Supply Currents (Into V
CC
) Excluding External Current, Changed some typical and maximum current
numbers at 85°C.
Table 46, Corrected note regarding USCI CLK function taking precedence over USCI STE function.
SLAS619F
Removed all occurrences of ROSC; does not apply to this device.
SLAS619G
Recommended Operating Conditions, Added note regarding interaction between minimum VCC and SVSH.
Internal Reference, Low-Frequency Oscillator (REFO), Corrected t
START
UNIT (changed from µA to µs).
SLAS619H
Recommended Operating Conditions, Added test conditions for typical characteristics.
DCO Frequency, Added note (1).
Table 58 and Table 59, Corrected addresses of the Timer_D0 and Timer_D1 device descriptors.
SLAS619I
REF, External Reference (MSP430F51x2 Devices Only), Changed note (1) from "12-bit accuracy" to "10-bit accuracy".
Comparator_B, Changed description and symbol for TC
CB_REF
.
Flash Memory, Changed I
MERASE
, I
BANK
values.
SLAS619J
Added Applications, Development Tools Support, and Device and Development Tool Nomenclature.
Added preview YFF package option.
Table 3, Added note about pullup resistor on RST/NMI/SBWTDIO.
Table 10, Corrected Interrupt Event names for PMMSWBOR (BOR) and PMMSWPOR (POR).
Recommended Operating Conditions, Added note about C
(VCORE)
tolerance.
Outputs – Ports P1 to P3 (Full Drive Strength, P1.6 and P1.7, P2.0 to P2.7, P3.0 and P3.1) and Outputs – Ports P1 to P3
(Reduced Drive Strength, P1.6 and P1.7, P2.0 to P2.7, P3.0 and P3.1), Changed V
OH5
MAX specification from V
CC
to
V
IO
.
Comparator_B, Corrected Test Conditions for I
AVCC_REF
.
Timer_D, Local Clock Generator Frequency, Changed df
HRCG
/dV
VCORE
to df
HRCG
/dV
DVCC
.
Timer_D, Local Clock Generator Frequency, Added note about local clock generator maximum frequency.
94 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: MSP430F5172 MSP430F5152 MSP430F5132 MSP430F5171 MSP430F5151 MSP430F5131