Datasheet
MSP430F471x3, MSP430F471x6, MSP430F471x7
MIXED SIGNAL MICROCONTROLLER
SLAS626C -- OCTOBER 2008 -- REVISED MARCH 2011
29
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings (see Note 1)
Voltage applied at V
CC
to V
SS
--0.3 V to 4.1 V......................................................
Voltage applied to any pin (see Note 2) --0.3 V to V
CC
+0.3V.......................................
Diode current at any device terminal . 2mA......................................................
Storage temperature, T
stg
: Unprogrammed device (see Note 3) --55C to 150C.......................
Programmed device (see Note 3) --40Cto85C..........................
NOTES: 1. Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended
operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
2. All voltages referenced to V
SS
. The JTAG fuse-blow voltage, V
FB
, is allowed to exceed the absolute maximum rating. The voltage
is applied to the TDI/TCLK pin when blowing the JTAG fuse.
3. Higher temperature may be applied during board soldering process according to the current JEDEC J--STD--020 specification with
peak reflow temperatures not higher than classified on the device label on the shipping boxes or reels.