Datasheet

MSP430x461x1, MSP430x461x
MIXED SIGNAL MICROCONTROLLER
85
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
port P10, P10.6, input/output with Schmitt trigger
Bus
Keeper
EN
Direction
0: Input
1: Output
P10SEL.x
1
0
P10DIR.x
P10IN.x
LCDS0
Segment Sy
1
0
P10OUT.x
Note: x = 6
y
=3
P10.6/S3/A15
DV
SS
INCH=15
#
A15
#
Pad Logic
# = Signal from or to ADC12
(MSP430x461x only)
port P10 (P10.6) pin functions
PIN NAME (P10 X)
X
FUNCTION
CONTROL BITS / SIGNALS
PIN NAME (P10.X)
X FUNCTION
P10DIR.x P10SEL.x INCHx LCDS0
P10.6/S3/A15 6
P5.0 (I/O) (see Note 1) I: 0; O: 1 0 X 0
A15 (MSP430x461x only, see Notes 1, 3) X 1 15 0
S3 enabled (see Note 1) X 0 X 1
S3 disabled (see Note 1) X 1 X 1
NOTES: 1. X: Don’t care.
2. N/A: Not available or not applicable.
3. Setting the P10SEL.x bit disables the output driver as well as the input Schmitt trigger to prevent parasitic cross currents when
applying analog signals.