Datasheet

Manual Update Sheet

SLAZ555–December 2013

Corrections to MSP430x43x, MSP430x43x1, MSP430x44x

Data Sheet (SLAS344J)

Document Being Updated: MSP430x43x, MSP430x43x1, MSP430x44x Mixed Signal Microcontroller

Literature Number Being Updated: SLAS344J

Page Change or Add

61 In both entries in the " Port/LCD " column of the table:

0: LCDM < 40h should be changed to 0: LCDPx < 02h.

In note ‡:

LCDM ≥ 40h should be changed to LCDPx ≥ 02h.

62 In top left of the figure:

LCDM.5 should be changed to bit 0 of LCDPx, which is bit 5 of the LCDCTL register.

LCDM.6 should be changed to bit 1 of LCDPx, which is bit 6 of the LCDCTL register.

LCDM.7 should be changed to bit 2 of LCDPx, which is bit 7 of the LCDCTL register.

63 In top left of the figure:

LCDM.7 should be changed to bit 2 of LCDPx, which is bit 7 of the LCDCTL register.

64 In the table at the bottom of the page:

LCDM < 020h should be changed to LCDPx < 01h.

LCDM ≥ 020h should be changed to LCDPx ≥ 01h.

LCDM < 0E0h should be changed to LCDPx < 07h.

LCDM ≥ 0E0h should be changed to LCDPx ≥ 07h.

LCDM < 0C0h should be changed to LCDPx < 06h.

LCDM ≥ 0C0h should be changed to LCDPx ≥ 06h.

65 In both entries in the " Port/LCD " column of the table:

0: LCDM < 20h should be changed to 0: LCDPx < 01h.

SLAZ555–December 2013 Corrections to MSP430x43x, MSP430x43x1, MSP430x44x Data Sheet

(SLAS344J)

Submit Documentation Feedback