Datasheet

MSP430F42xA
MIXED SIGNAL MICROCONTROLLER
SLAS587 -- FEBRUARY 2008
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
special function registers
Most interrupt and module enable bits are collected into the lowest address space. Special function register bits
that are not allocated to a functional purpose are not physically present in the device. Simple software access
is provided with this arrangement.
interrupt enable 1 and 2
7654 0
UTXIE0 OFIE WDTIE
32 1
rw–0 rw–0 rw–0
Address
0h URXIE0 ACCVIE NMIIE
rw–0 rw–0 rw–0
WDTIE: Watchdog timer interrupt enable. Inactive if watchdog mode is selected. Active if watchdog timer
is configured in interval timer mode.
OFIE: Oscillator fault interrupt enable
NMIIE: Nonmaskable interrupt enable
ACCVIE: Flash access violation interrupt enable
URXIE0: USART0: UART and SPI receive-interrupt enable
UTXIE0: USART0: UART and SPI transmit-interrupt enable
7654 0321
Address
1h BTIE
rw-0
BTIE: Basic Timer1 interrupt enable
interrupt flag register 1 and 2
7654 0
UTXIFG0 OFIFG WDTIFG
32 1
rw–0 rw–1 rw–(0)
Address
02h URXIFG0 NMIIFG
rw–1 rw–0
WDTIFG: Set on watchdog timer overflow (in watchdog mode) or security key violation. Reset on V
CC
power up or a reset condition at the RST/NMI pin in reset mode.
OFIFG: Flag set on oscillator fault
NMIIFG: Set via RST
/NMI pin
URXIFG0: USART0: UART and SPI receive flag
UTXIFG0: USART0: UART and SPI transmit flag
7654 0321
Address
3h BTIFG
rw-0
BTIFG: Basic Timer1 interrupt flag