Datasheet
MSP430F41x2
MIXED SIGNAL MICROCONTROLLER
SLAS648E -- APRIL 2009 -- REVISED MARCH 2011
36
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature (unless otherwise
noted)
crystal oscillator, LFXT1, high frequency modes
PARAMETER TEST CONDITIONS V
CC
MIN TYP MAX UNIT
f
L
F
X
T
1
o
s
c
i
l
l
a
t
o
r
c
r
s
t
a
l
f
r
e
q
e
n
c
Ceramic resonator 1.8 V to 3.6 V 0.45 6
M
H
f
LFXT1
LFXT1 oscillator crystal
f
requency
Crystal resonator
1.8 V to 3.6 V 1 6
MHz
C
L,eff
Integrated effective load capacitance,
HF mode (see Note 1)
SeeNote2 1 pF
Duty cycle Measured at P1.6/ACLK 2.2 V/3 V 40 50 60 %
NOTES: 1. Includes parasitic bond and package capacitance (approximately 2 pF per pin).
Since the PCB adds additional capacitance it is recommended to verify the correct load by measuring the ACLK frequency. For a
correct setup the effective load capacitance should always match the specification of the used crystal.
2. Requires external capacitors at both terminals. Values are specified by crystal manufacturers.
internal very low power, low-frequency oscillator ( VLO)
PARAMETER TEST CONDITIONS V
CC
MIN TYP MAX UNIT
f
VLO
VLO frequency T
A
=--40Cto85C 2.2 V/3 V 4 12 20 kHz
df
VLO
/dT VLO frequency temperature drift See Note 2.2 V/3 V 0.5 %/C
df
VLO
/dV
CC
VLO frequency supply voltage drift SeeNote2 1.8V to 3.6V 4 %/V
NOTES: 1. Calculated using the box method:
I Version: (MAX(--40_Cto85_C) -- MIN(--40_Cto85_C))/MIN(--40_Cto85_C)/(85_C--(--40_C))
2. Calculated using the box method: (MAX(1.8 V to 3.6 V) -- MIN(1.8 V to 3.6 V))/MIN(1.8 V to 3.6 V)/(3.6 V -- 1.8 V)
RAM
PARAMETER TEST CONDITIONS MIN MAX UNIT
VRAMh SeeNote1 CPU halted 1.6 V
NOTE 1: This parameter defines the minimum supply voltage when the data in program memory RAM remain unchanged. No program execution
should take place during this supply voltage condition.