Datasheet

MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I –JUNE 2007–REVISED DECEMBER 2012 www.ti.com
REVISION HISTORY
LITERATURE
SUMMARY
NUMBER
SLAS547 Product Preview release
SLAS547A Production Data release
Corrected terminal names and descriptions for pins 34 and 35 in "Terminal Functions - MSP430F23x" (page 9)
Corrected terminal names for pins 13, 14, and 15 in "Terminal Functions - MSP430F24x1" (page 13)
Corrected interrupt source and flag entries for USCI_A1/USCI_B1 in "interrupt vector addresses" table (page 17)
SLAS547B Changed index values from 1-3 to 0-2 in Figures 23 to 26 (pages 52 and 54)
Changed f
max,BITCLK
and t
τ
parameters in "USCI (UART mode)" table (page 56)
Corrected "Port P1.0 to P1.7 pin functions" table (page 72)
Removed incorrect CAPD.x column in "Port P6.0 to P6.6 pin functions" table (page 80)
Added Development Tool Support section (page 2)
SLAS547C
Updated parametric values in "low-power mode supply current into V
CC
excluding external current" table (page 34)
SLAS547D Updated notes and t
CMErase
MIN value "flash memory" table (page 34)
SLAS547E Changed limits on t
d(SVSon)
parameter (page 41)
Changed "Port 6.0 to 6.6 Pin Functions" table (page 77)
SLAS547F
Changed "Port 6.7 Pin Functions" table (page 78)
SLAS547G Changed T
stg
, Programmed device, to -55°C to 150°C in Absolute Maximum Ratings
Corrected formatting error of T
A
column in Active Mode Supply Current (both I
AM,1MHz
parameters) and in Low-Power-
SLAS547H
Mode Supply Currents (I
LPM0,1MHz
and I
LPM0,100kHz
parameters)
Corrected number of capture/compare registers in description in Timer_B3 (MSP430F23x Devices).
SLAS547I
Added typical test conditions in Recommended Operating Conditions.
Removed "Timer_A3.CCIxA" entries from P1.5 through P1.7 in Table 20.
80 Submit Documentation Feedback Copyright © 2007–2012, Texas Instruments Incorporated