Datasheet

MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I –JUNE 2007–REVISED DECEMBER 2012 www.ti.com
Table 3. Terminal Functions, MSP430F24x, MSP430F2410 (continued)
TERMINAL
I/O DESCRIPTION
NAME NO.
P6.1/A1 60 I/O General-purpose digital I/O / analog input A1 - 12-bit ADC
P6.2/A2 61 I/O General-purpose digital I/O / analog input A2 - 12-bit ADC
P6.3/A3 2 I/O General-purpose digital I/O / analog input A3 - 12-bit ADC
P6.4/A4 3 I/O General-purpose digital I/O / analog input A4 - 12-bit ADC
P6.5/A5 4 I/O General-purpose digital I/O / analog input A5 - 12-bit ADC
P6.6/A6 5 I/O General-purpose digital I/O / analog input A6 - 12-bit ADC
P6.7/A7/SVSIN 6 I/O General-purpose digital I/O / analog input A7 - 12-bit ADC/SVS input
XT2OUT 52 O Output of crystal oscillator XT2
XT2IN 53 I Input for crystal oscillator XT2
RST/NMI 58 I Reset input, nonmaskable interrupt input, or bootstrap loader start (in flash devices)
TCK 57 I Test clock (JTAG). TCK is the clock input port for device programming test and bootstrap loader start.
TDI/TCLK 55 I Test data input or test clock input. The device protection fuse is connected to TDI/TCLK.
TDO/TDI 54 I/O Test data output. TDO/TDI data output or programming data input terminal.
TMS 56 I Test mode select. TMS is used as an input port for device programming and test.
V
eREF+
10 I Input for an external reference voltage
V
REF+
7 O Positive output of the reference voltage in the ADC12
Negative input for the reference voltage for both sources, the internal reference voltage, or an external
V
REF-
/V
eREF-
11 I
applied reference voltage
XIN 8 I Input for crystal oscillator XT1. Standard or watch crystals can be connected.
XOUT 9 O Output for crystal oscillator XT1. Standard or watch crystals can be connected.
QFN Pad NA NA QFN package pad connection to DV
SS
recommended (RGC package only)
12 Submit Documentation Feedback Copyright © 2007–2012, Texas Instruments Incorporated