Datasheet

0A023hR10
R11
Before: After:
PC
0FA15h
PC
old
0A023hR10
R11
PC PC
old
+ 2
0A023h
www.ti.com Addressing Modes
3.3.1 Register Mode
The register mode is described in Table 3-4.
Table 3-4. Register Mode Description
Assembler Code Content of ROM
MOV R10,R11 MOV R10,R11
Length: One or two words
Operation: Move the content of R10 to R11. R10 is not affected.
Comment: Valid for source and destination
Example:
MOV R10,R11
NOTE: Data in Registers
The data in the register can be accessed using word or byte instructions. If byte instructions
are used, the high byte is always 0 in the result. The status bits are handled according to the
result of the byte instructions.
49
SLAU144J–December 2004–Revised July 2013 CPU
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated