Datasheet

0h
TBR
(max)
TBIFG
Output Mode 1: Set
Output Mode 2:Toggle/Reset
Output Mode 3: Set/Reset
Output Mode 4:Toggle
Output Mode 5: Reset
Output Mode 6:Toggle/Set
Output Mode 7: Reset/Set
TBCL0
TBCL1
EQU1 TBIFG EQU1 EQU0 Interrupt EventsEQU0
Timer_B Operation www.ti.com
13.2.5.1.2 Output Example, Timer in Continuous Mode
The OUTx signal is changed when the timer reaches the TBCLx and TBCL0 values, depending on the
output mode, An example is shown in Figure 13-13 using TBCL0 and TBCL1.
Figure 13-13. Output Example, Timer in Continuous Mode
386
Timer_B SLAU144J–December 2004–Revised July 2013
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated