Datasheet

0h
0FFFFh
TAIFG
Output Mode 1: Set
Output Mode 2:Toggle/Reset
Output Mode 3: Set/Reset
Output Mode 4:Toggle
Output Mode 5: Reset
Output Mode 6:Toggle/Set
Output Mode 7: Reset/Set
TACCR0
TACCR1
EQU1 TAIFG EQU1 EQU0 Interrupt EventsEQU0
www.ti.com Timer_A Operation
12.2.5.3 Output Example — Timer in Continuous Mode
The OUTx signal is changed when the timer reaches the TACCRx and TACCR0 values, depending on the
output mode. An example is shown in Figure 12-13 using TACCR0 and TACCR1.
Figure 12-13. Output Example—Timer in Continuous Mode
365
SLAU144J–December 2004–Revised July 2013 Timer_A
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated