Datasheet

www.ti.com

Instruction Set Description

4.6.3.31 SBCX

* SBCX.A Subtract borrow (.NOT. carry) from destination address-word

* SBCX.[W] Subtract borrow (.NOT. carry) from destination word

* SBCX.B Subtract borrow (.NOT. carry) from destination byte

SBCX.A dst

Syntax

SBCX dst or SBCX.W dst

SBCX.B dst

Operation dst + 0FFFFFh + C → dst

dst + 0FFFFh + C → dst

dst + 0FFh + C → dst

SBCX.A #0,dst

Emulation

SBCX #0,dst

SBCX.B #0,dst

Description The carry bit (C) is added to the destination operand minus one. The previous contents

of the destination are lost.

Status Bits N: Set if result is negative, reset if positive

Z: Set if result is zero, reset otherwise

C: Set if there is a carry from the MSB of the result, reset otherwise

Set to 1 if no borrow, reset if borrow

V: Set if an arithmetic overflow occurs, reset otherwise

Mode Bits OSCOFF, CPUOFF, and GIE are not affected.

Example The 8-bit counter pointed to by R13 is subtracted from a 16-bit counter pointed to by

R12.

SUBX.B @R13,0(R12) ; Subtract LSDs

SBCX.B 1(R12) ; Subtract carry from MSD

NOTE: Borrow implementation

The borrow is treated as a .NOT. carry:

Borrow Carry Bit

Yes 0

No 1

249

SLAU144J–December 2004–Revised July 2013 CPUX

Submit Documentation Feedback