Datasheet

www.ti.com Instruction Set Description
4.6.2.34 POP
* POP[.W] Pop word from stack to destination
* POP.B Pop byte from stack to destination
POP dst
Syntax
POP.B dst
Operation @SP → temp
SP + 2 → SP
temp → dst
Emulation
MOV @SP+,dst or MOV.W @SP+,dst
MOV.B @SP+,dst
Description The stack location pointed to by the SP (TOS) is moved to the destination. The SP is
incremented by two afterwards.
Status Bits Status bits are not affected.
Example The contents of R7 and the SR are restored from the stack.
POP R7 ; Restore R7
POP SR ; Restore status register
Example The contents of RAM byte LEO is restored from the stack.
POP.B LEO ; The low byte of the stack is moved to LEO.
Example The contents of R7 is restored from the stack.
POP.B R7 ; The low byte of the stack is moved to R7,
; the high byte of R7 is 00h
Example The contents of the memory pointed to by R7 and the SR are restored from the stack.
POP.B 0(R7) ; The low byte of the stack is moved to the
; the byte which is pointed to by R7
: Example: R7 = 203h
; Mem(R7) = low byte of system stack
: Example: R7 = 20Ah
; Mem(R7) = low byte of system stack
POP SR ; Last word on stack moved to the SR
NOTE: System stack pointer
The system SP is always incremented by two, independent of the byte suffix.
197
SLAU144J–December 2004–Revised July 2013 CPUX
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated