Datasheet

  
  
SLAS491A − AUGUST 2005 − REVISED OCTOBER 2005
56
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION, MSP430x20x2
Port P1 (P1.0 to P1.2) pin functions, MSP430x20x2
PIN NAME (P1.X)
X
FUNCTION
CONTROL BITS / SIGNALS
PIN NAME (P1.X)
X
FUNCTION
P1DIR.x P1SEL.x ADC10AE.x INCHx
P1.0/TACLK/ACLK/A0
0
P1.0† Input/Output 0/1 0 0 N/A
P1.0/TACLK/ACLK/A0
0
Timer_A2.TACLK/INCLK 0 1 0 N/A
ACLK 1 1 0 N/A
A0 (see Note 3) X X 1 0
P1.1/TA0/A1
1
P1.1† Input/Output 0/1 0 0 N/A
P1.1/TA0/A1
1
Timer_A2.CCI0A 0 1 0 N/A
Timer_A2.TA0 1 1 0 N/A
A1 (see Note 3) X X 1 1
P1.2/TA1/A2
2
P1.2† Input/Output 0/1 0 0 N/A
P1.2/TA1/A2
2
Timer_A2.CCI1A 0 1 0 N/A
Timer_A2.TA1 1 1 0 N/A
A2 (see Note 3) X X 1 2
†
Default after reset (PUC/POR)
NOTES: 1. N/A: Not available or not applicable.
2. X: Don’t care.
3. Setting the ADC10AE.x bit disables the output driver as well as the input schmitt trigger to prevent parasitic cross currents when
applying analog signals.