Datasheet

MSP430BT5190
www.ti.com SLAS703A –APRIL 2010–REVISED AUGUST 2013
Universal Serial Communication Interface (USCI)
The USCI modules are used for serial data communication. The USCI module supports synchronous
communication protocols such as SPI (3 or 4 pin) and I
2
C, and asynchronous communication protocols such as
UART, enhanced UART with automatic baudrate detection, and IrDA. Each USCI module contains two portions,
A and B.
The USCI_An module provides support for SPI (3 pin or 4 pin), UART, enhanced UART, or IrDA.
The USCI_Bn module provides support for SPI (3 pin or 4 pin) or I2C.
The MSP430BT5190 includes four complete USCI modules (n = 0 to 3).
TA0
TA0 is a 16-bit timer/counter (Timer_A type) with five capture/compare registers. It can support multiple
capture/compares, PWM outputs, and interval timing. It also has extensive interrupt capabilities. Interrupts may
be generated from the counter on overflow conditions and from each of the capture/compare registers.
Table 9. TA0 Signal Connections
INPUT PIN
MODULE DEVICE
OUTPUT PIN NUMBER
DEVICE INPUT MODULE MODULE
NUMBER
OUTPUT OUTPUT
SIGNAL INPUT SIGNAL BLOCK
SIGNAL SIGNAL
PZ, ZQW PZ, ZQW
17, H1-P1.0 TA0CLK TACLK
ACLK ACLK
Timer NA NA
SMCLK SMCLK
17, H1-P1.0 TA0CLK TACLK
18, H4-P1.1 TA0.0 CCI0A 18, H4-P1.1
57, H9-P8.0 TA0.0 CCI0B 57, H9-P8.0
CCR0 TA0 TA0.0
ADC12 (internal)
DV
SS
GND
ADC12SHSx = {1}
DV
CC
V
CC
19, J4-P1.2 TA0.1 CCI1A 19, J4-P1.2
58, H11-P8.1 TA0.1 CCI1B 58, H11-P8.1
CCR1 TA1 TA0.1
DV
SS
GND
DV
CC
V
CC
20, J1-P1.3 TA0.2 CCI2A 20, J1-P1.3
59, H12-P8.2 TA0.2 CCI2B 59, H12-P8.2
CCR2 TA2 TA0.2
DV
SS
GND
DV
CC
V
CC
21, J2-P1.4 TA0.3 CCI3A 21, J2-P1.4
60, G9-P8.3 TA0.3 CCI3B 60, G9-P8.3
CCR3 TA3 TA0.3
DV
SS
GND
DV
CC
V
CC
22, K1-P1.5 TA0.4 CCI4A 22, K1-P1.5
61, G11-P8.4 TA0.4 CCI4B 61, G11-P8.4
CCR4 TA4 TA0.4
DV
SS
GND
DV
CC
V
CC
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 23
Product Folder Links: MSP430BT5190