Datasheet

MSP430BT5190
www.ti.com SLAS703A –APRIL 2010–REVISED AUGUST 2013
PMM, Brown-Out Reset (BOR)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
BOR
H
on voltage,
V(DV
CC
_BOR_IT–) | dDV
CC
/d
t
| < 3 V/s 1.45 V
DV
CC
falling level
BOR
H
off voltage,
V(DV
CC
_BOR_IT+) | dDV
CC
/d
t
| < 3 V/s 0.80 1.30 1.50 V
DV
CC
rising level
V(DV
CC
_BOR_hys) BOR
H
hysteresis 60 250 mV
Pulse duration required at RST/NMI pin
t
RESET
2 µs
to accept a reset
PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
CORE3
(AM) Core voltage, active mode, PMMCOREV = 3 2.4 V ≤ DV
CC
≤ 3.6 V 1.90 V
V
CORE2
(AM) Core voltage, active mode, PMMCOREV = 2 2.2 V ≤ DV
CC
≤ 3.6 V 1.80 V
V
CORE1
(AM) Core voltage, active mode, PMMCOREV = 1 2.0 V ≤ DV
CC
≤ 3.6 V 1.60 V
V
CORE0
(AM) Core voltage, active mode, PMMCOREV = 0 1.8 V ≤ DV
CC
≤ 3.6 V 1.40 V
V
CORE3
(LPM) Core voltage, low-current mode, PMMCOREV = 3 2.4 V ≤ DV
CC
≤ 3.6 V 1.94 V
V
CORE2
(LPM) Core voltage, low-current mode, PMMCOREV = 2 2.2 V ≤ DV
CC
≤ 3.6 V 1.84 V
V
CORE1
(LPM) Core voltage, low-current mode, PMMCOREV = 1 2.0 V ≤ DV
CC
≤ 3.6 V 1.64 V
V
CORE0
(LPM) Core voltage, low-current mode, PMMCOREV = 0 1.8 V ≤ DV
CC
≤ 3.6 V 1.44 V
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 53
Product Folder Links: MSP430BT5190