Datasheet

MSP430BT5190
SLAS703A –APRIL 2010–REVISED AUGUST 2013 www.ti.com
Table 2. Terminal Functions (continued)
TERMINAL
NO. I/O
(1)
DESCRIPTION
NAME
PZ ZQW
General-purpose digital I/O
PJ.2/TMS
(4)
94 D5 I/O
JTAG test mode select
General-purpose digital I/O
PJ.3/TCK
(4)
95 B4 I/O
JTAG test clock
Reset input active low
(5)
RST/NMI/SBWTDIO
(3)
96 A3 I/O Non-maskable interrupt input
Spy-Bi-Wire data input/output when Spy-Bi-Wire operation activated.
General-purpose digital I/O
P6.0/A0 97 D4 I/O
Analog input A0 – ADC
General-purpose digital I/O
P6.1/A1 98 B3 I/O
Analog input A1 – ADC
General-purpose digital I/O
P6.2/A2 99 A2 I/O
Analog input A2 – ADC
General-purpose digital I/O
P6.3/A3 100 B2 I/O
Analog input A3 – ADC
Reserved N/A
(6)
(5) When this pin is configured as rest, the internal pullup resistor is enabled by default.
(6) G5, E8, F8, G8, H8, E7, H7, E6, H6, E5, F5, H5, C3 are reserved and should be connected to ground.
10 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: MSP430BT5190