Datasheet
MSP430F5229, MSP430F5227, MSP430F5224, MSP430F5222
MSP430F5219, MSP430F5217, MSP430F5214, MSP430F5212
SLAS718D –NOVEMBER 2012–REVISED OCTOBER 2013
www.ti.com
Outputs – General-Purpose I/O DVIO Domain (Full Drive Strength)
(P1.4 to P1.7, P2.0 to P2.7, P3.0 to P3.4, P4.0 to P4.7, P7.0 to P7.5)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS V
IO
(1)
MIN MAX UNIT
I
(OHmax)
= –3 mA
(2)
V
IO
– 0.25 V
IO
V
OH
High-level output voltage 1.62 V to 1.98 V V
I
(OHmax)
= –6 mA
(2)
V
IO
– 0.50 V
IO
I
(OLmax)
= 3 mA
(2)
V
SS
V
SS
+ 0.25
V
OL
Low-level output voltage 1.62 V to 1.98 V V
I
(OLmax)
= 6 mA
(2)
V
SS
V
SS
+ 0.50
(1) In all test conditions, V
IO
≤ V
CC
.
(2) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined, should not exceed ± 48 mA to hold the maximum voltage drop
specified.
Outputs – General-Purpose I/O DVIO Domain (Reduced Drive Strength)
(P1.4 to P1.7, P2.0 to P2.7, P3.0 to P3.4, P4.0 to P4.7, P7.0 to P7.5)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
(1)
PARAMETER TEST CONDITIONS V
IO
(2)
MIN MAX UNIT
I
(OHmax)
= –1 mA
(3)
V
IO
– 0.25 V
IO
V
OH
High-level output voltage 1.62 V to 1.98 V V
I
(OHmax)
= –2 mA
(3)
V
IO
– 0.50 V
IO
I
(OLmax)
= 1 mA
(3)
V
SS
V
SS
+ 0.25
V
OL
Low-level output voltage 1.62 V to 1.98 V V
I
(OLmax)
= 2 mA
(3)
V
SS
V
SS
+ 0.50
(1) Selecting reduced drive strength may reduce EMI.
(2) In all test conditions, V
IO
≤ V
CC
.
(3) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined, should not exceed ± 48 mA to hold the maximum voltage drop
specified.
56 Submit Documentation Feedback Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: MSP430F5229 MSP430F5227 MSP430F5224 MSP430F5222 MSP430F5219 MSP430F5217
MSP430F5214 MSP430F5212