Datasheet
MSP430F5229, MSP430F5227, MSP430F5224, MSP430F5222
MSP430F5219, MSP430F5217, MSP430F5214, MSP430F5212
www.ti.com
SLAS718D –NOVEMBER 2012–REVISED OCTOBER 2013
Leakage Current – General-Purpose I/O DVCC Domain
(P1.0 to P1.3, P5.0 to P5.5, P6.0 to P6.7, PJ.0 to PJ.3)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS V
CC
MIN MAX UNIT
I
lkg(Px.y)
High-impedance leakage current
(1) (2)
1.8 V, 3 V -50 50 nA
(1) The leakage current is measured with V
SS
or V
CC
applied to the corresponding pins, unless otherwise noted.
(2) The leakage of the digital port pins is measured individually. The port pin is selected for input and the pullup or pulldown resistor is
disabled.
Leakage Current – General-Purpose I/O DVIO Domain
(P1.4 to P1.7, P2.0 to P2.7, P3.0 to P3.4, P4.0 to P4.7, P7.0 to P7.5)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS V
IO
(1)
MIN MAX UNIT
I
lkg(Px.y)
High-impedance leakage current
(2) (3)
1.62 V to 1.98 V -50 50 nA
(1) In all test conditions, V
IO
≤ V
CC
.
(2) The leakage current is measured with V
SS
or V
IO
applied to the corresponding pins, unless otherwise noted.
(3) The leakage of the digital port pins is measured individually. The port pin is selected for input and the pullup or pulldown resistor is
disabled.
Outputs – General-Purpose I/O DVCC Domain (Full Drive Strength)
(P1.0 to P1.3, P5.0 to P5.5, P6.0 to P6.7, PJ.0 to PJ.3)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS V
CC
MIN MAX UNIT
I
(OHmax)
= –3 mA
(1)
V
CC
– 0.25 V
CC
1.8 V
I
(OHmax)
= –10 mA
(2)
V
CC
– 0.60 V
CC
V
OH
High-level output voltage V
I
(OHmax)
= –5 mA
(1)
V
CC
– 0.25 V
CC
3 V
I
(OHmax)
= –15 mA
(2)
V
CC
– 0.60 V
CC
I
(OLmax)
= 3 mA
(1)
V
SS
V
SS
+ 0.25
1.8 V
I
(OLmax)
= 10 mA
(2)
V
SS
V
SS
+ 0.60
V
OL
Low-level output voltage V
I
(OLmax)
= 5 mA
(1)
V
SS
V
SS
+ 0.25
3 V
I
(OLmax)
= 15 mA
(2)
V
SS
V
SS
+ 0.60
(1) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined should not exceed ±48 mA to hold the maximum voltage drop
specified.
(2) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined should not exceed ±100 mA to hold the maximum voltage
drop specified.
Outputs – General-Purpose I/O DVCC Domain (Reduced Drive Strength)
(P1.0 to P1.3, P5.0 to P5.5, P6.0 to P6.7, PJ.0 to PJ.3)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
(1)
PARAMETER TEST CONDITIONS V
CC
MIN MAX UNIT
I
(OHmax)
= –1 mA
(2)
V
CC
– 0.25 V
CC
1.8 V
I
(OHmax)
= –3 mA
(3)
V
CC
– 0.60 V
CC
V
OH
High-level output voltage V
I
(OHmax)
= –2 mA
(2)
V
CC
– 0.25 V
CC
3.0 V
I
(OHmax)
= –6 mA
(3)
V
CC
– 0.60 V
CC
I
(OLmax)
= 1 mA
(2)
V
SS
V
SS
+ 0.25
1.8 V
I
(OLmax)
= 3 mA
(3)
V
SS
V
SS
+ 0.60
V
OL
Low-level output voltage V
I
(OLmax)
= 2 mA
(2)
V
SS
V
SS
+ 0.25
3.0 V
I
(OLmax)
= 6 mA
(3)
V
SS
V
SS
+ 0.60
(1) Selecting reduced drive strength may reduce EMI.
(2) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined, should not exceed ± 48 mA to hold the maximum voltage drop
specified.
(3) The maximum total current, I
(OHmax)
and I
(OLmax)
, for all outputs combined, should not exceed ± 100 mA to hold the maximum voltage
drop specified.
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 55
Product Folder Links: MSP430F5229 MSP430F5227 MSP430F5224 MSP430F5222 MSP430F5219 MSP430F5217
MSP430F5214 MSP430F5212