Datasheet

2–6
r[i] The r <ENTER> command, shown in Figure 2–6, without a specific register number, shows all 16 CPU
registers R0 to R15. With this syntax, a modification of the register contents is not possible.
Enter r then <ENTER> at the command prompt
>init
MSP–STK430A320
>r
reg 0000 : 0300 03de 0008 0000 f48c 0010 0069 000e
reg 0008 : 1a28 402a 0000 ffd0 4040 6803 e2c2 07a0
>
Figure 2–6. Register Command