Datasheet

MSP-TS430PM64 www.ti.com
Table B-18. MSP-TS430PM64 Bill of Materials
No. per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
DNP: Only recommendation.
1.1 C3, C4 0 47pF, SMD0805
Check your crystal spec.
2 C6, C7 1 10uF, 10V, Tantal Size B 511-1463-2-ND DNP: C6
3 C5 1 100nF, SMD0805 478-3351-2-ND
4 C8 1 10nF, SMD0805 478-1383-2-ND
5 C9 1 470nF, SMD0805 478-1403-2-ND
6 D1 1 green LED, SMD0805 P516TR-ND
DNP: Headers and
receptacles enclosed with
kit.Keep vias free of solder.
7 J1, J2, J3, J4 0 16-pin header, TH
SAM1029-16-ND : Header
SAM1213-16-ND : Receptacle
8 J5 1 3-pin header, male, TH SAM1035-03-ND
9 J6, J7 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
11 2 Jumper 15-38-1024-ND Place on: J6, J7
12 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
13 BOOTST 0 10-pin connector, male, TH
solder
Q1: Micro Crystal MS1V-T1K
DNP: Keep vias free of
14 Q1, Q2 0 Crystal 32.768kHz, C(Load) =
solder
12.5pF
15 R3 1 330 Ω, SMD0805 541-330ATR-ND
R1, R2, R4,
R6, R7, R8,
DNP: R4, R6, R7, R9, R10,
16 R9, R10, 3 0 Ω, SMD0805 541-000ATR-ND
R11, R12, R13, R14
R11, R12,
R13, R14
17 R5 1 47k Ω, SMD0805 541-47000ATR-ND
18 U1 1 Socket: IC51-0644-807 Manuf.: Yamaichi
19 PCB 1 78 x 75 mm 2 layers
Rubber Apply to corners at bottom
20 4 select appropriate
standoff side
MSP430F2619IPM DNP: Enclosed with kit
21 MSP430 22
MSP430F417IPM supplied by TI
78
Hardware SLAU278Q–May 2009–Revised February 2014
Submit Documentation Feedback
Copyright © 2009–2014, Texas Instruments Incorporated