Datasheet

Jumper JP2
Open to disconnect LED
Connector J5
External power connector
Jumper JP1 to "ext"
Jumpers JP5 to JP10
Close 1-2 to debug in Spy-Bi-Wire mode
Close 2-3 to debug in 4-wire JTAG mode
D1 LED connected to P1.0
Jumper JP1
Open to measure current
Orient Pin 1 of MSP430 device
www.ti.com MSP-TS430RGZ48B
Figure B-28. MSP-TS430RGZ48B Target Socket Module, PCB
71
SLAU278Q–May 2009–Revised February 2014 Hardware
Submit Documentation Feedback
Copyright © 2009–2014, Texas Instruments Incorporated