Datasheet

MSP-TS430PW14

www.ti.com

Table B-2. MSP-TS430PW14 Bill of Materials

No. per

Position Ref Des Description DigiKey Part No. Comment

Board

1 C1, C2 0 12pF, SMD0805 DNP

10uF, 10V, Tantal Size

2 C7 1 511-1463-2-ND

3 C3, C5 1 100nF, SMD0805 478-3351-2-ND DNP: C3

4 C8 0 2.2nF, SMD0805 DNP

5 D1 1 green LED, SMD0603 475-1056-2-ND

DNP: Headers and receptacles

enclosed with kit. Keep vias free of

solder

6 J1, J2 0 7-pin header, TH

SAM1029-07-ND : Header

SAM1213-07-ND : Receptacle

J3, J5, J7,

Place jumpers on headers J5, J7, J8,

7 J8, J9, J10, 8 3-pin header, male, TH SAM1035-03-ND

J9, J10, J11, J12; Pos 1-2

J11, J12

8 J4, J6 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header

9 9 Jumper 15-38-1024-ND Place on: J5, J7-J12; Pos 1-2

14-pin connector, male,

10 JTAG 1 HRP14H-ND

Micro Crystal MS1V-T1K

12 Q1 0 Crystal 32.768kHz, C(Load) = DNP: keep vias free of solder

12.5pF

13 R2, R3 2 330 Ω, SMD0805 541-330ATR-ND

15 R5 1 47k Ω, SMD0805 541-47000ATR-ND

16 U1 1 Socket: OTS-14-0.65-01 Manuf.: Enplas

17 PCB 1 56 x 53 mm 2 layers

For example, 3M

Adhesive Approximately 6mm

18 4 Bumpons Part No. SJ- Apply to corners at bottom side

plastic feet width, 2mm height

5302

19 MSP430 2 MSP430F2013IPW DNP: enclosed with kit, supplied by TI

Hardware SLAU278Q–May 2009–Revised February 2014

Submit Documentation Feedback