Datasheet

www.ti.com

Kit Contents, eZ430-Chronos-xxx

1.8 Kit Contents, eZ430-Chronos-xxx

'433, '868, '915

• One QUICK START GUIDE document

• One ez430-Chronos emulator

• One screwdriver

• Two spare screws

eZ430-Chronos-433:

– One 433-MHz eZ430-Chronos watch (battery included)

– One 433-MHz eZ430-Chronos access point

eZ430-Chronos-868:

– One 868-MHz eZ430-Chronos watch (battery included)

– One 868-MHz eZ430-Chronos access point

eZ430-Chronos-915:

– One 915-MHz eZ430-Chronos watch (battery included)

– One 915-MHz eZ430-Chronos access point

1.9 Kit Contents, MSP-FET430UIF

• One READ ME FIRST document

• One MSP-FET430UIF interface module

• One USB cable

• One 14-conductor cable

1.10 Kit Contents, MSP-FET430xx

• One READ ME FIRST document

• One MSP-FET430UIF USB interface module. This is the unit that has a USB B-connector on one end

of the case, and a 2×7-pin male connector on the other end of the case.

• One USB cable

• One 32.768-kHz crystal from Micro Crystal, if the board has an option to use the quartz.

• A 2×7-pin male JTAG connector is also present on the PCB (see different setup for L092)

• One 14-Pin JTAG conductor cable

• One small box containing two MSP430 device samples (See table for Sample Type)

• One target socket module. To determine the devices used for each board and a summary of the board,

see Table 1-2. The name of MSP-TS430xx board can be derived from the name of the MSP-FET430xx

kit; for example, the MSP-FET430U28A kit contains the MSP-TS430PW28A board.

Refer to the device data sheets for device specifications. Device errata can be found in the respective

device product folder on the web provided as a PDF document. Depending on the device, errata may also

be found in the device bug database at www.ti.com/sc/cgi-bin/buglist.cgi.

SLAU278Q–May 2009–Revised February 2014 Get Started Now!

Submit Documentation Feedback