Datasheet

MSP-TS430PZ100USB

www.ti.com

B.29 MSP-TS430PZ100USB

Due to the use of diodes in the power chain, the voltage on the MSP430F5xx device is approximately

0.3 V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for

example, to run the MCU at 3.0 V, set it to 3.3 V.

Figure B-57. MSP-TS430PZ100USB Target Socket Module, Schematic

118

Hardware SLAU278Q–May 2009–Revised February 2014

Submit Documentation Feedback