Datasheet

www.ti.com MSP-TS430PZ5x100
Table B-30. MSP-TS430PZ5x100 Bill of Materials
No. Per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
DNP: Only recommendation.
1b C3, C4 47pF, SMD0805
Check your crystal spec.
2 C6, C7 2 10uF, 10V, Tantal Size B 511-1463-2-ND
C5, C10,
3 C11, C12, 4 100nF, SMD0805 311-1245-2-ND DNP: C12, C14
C13, C14
4 C8 0 2.2nF, SMD0805 DNP
5 C9 1 470nF, SMD0805 478-1403-2-ND
6 D1 1 green LED, SMD0805 67-1553-1-ND
DNP: headers and
receptacles enclosed with kit.
Keep vias free of solder.
7 J1, J2, J3, J4 0 25-pin header, TH
SAM1029-25-ND : Header
SAM1213-25-ND : Receptacle
8 J5 1 3-pin header, male, TH SAM1035-03-ND
JP5, JP6,
9 JP7, JP8, 6 3-pin header, male, TH SAM1035-03-ND Place jumpers on pins 2-3
JP9, JP10
10 JP1, JP2 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
11 JP3 1 3-pin header, male, TH SAM1035-03-ND Place jumper on pins 1-2
Place on JP1, JP2, JP3, JP5,
12 9 Jumper 15-38-1024-ND
JP6, JP7, JP8, JP9, JP10
13 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
14 BOOTST 0 10-pin connector, male, TH
solder
Q1: Micro Crystal MS1V-T1K
DNP: Keep vias free of
15 Q1, Q2 0 Crystal 32.768kHz, C(Load) =
solder
12.5pF
16 R3, R7 2 330 Ω, SMD0805 541-330ATR-ND
R1, R2, R4,
R6, R8, R9, DNP: R6, R8, R9, R10, R11,
17 3 0 Ω, SMD0805 541-000ATR-ND
R10, R11, R12
R12
18 R5 1 47k Ω, SMD0805 541-47000ATR-ND
19 U1 1 Socket: IC357-1004-53N Manuf.: Yamaichi
20 PCB 1 90 x 82 mm 2 layers
Rubber Apply to corners at bottom
21 4 Select appropriate
standoff side
DNP: Enclosed with kit
22 MSP430 2 MSP430F5438IPZ
supplied by TI
117
SLAU278Q–May 2009–Revised February 2014 Hardware
Submit Documentation Feedback
Copyright © 2009–2014, Texas Instruments Incorporated