Datasheet

ECCN 5E002 TSPA - Technology / Software Publicly Available
MSP430F677x , MSP430F676x , MSP430F674x
www.ti.com SLAS768D –SEPTEMBER 2012–REVISED DECEMBER 2013
PMM, SVM High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVMHE = 0, DV
CC
= 3.6 V 0 nA
I
(SVMH)
SVM
H
current consumption SVMHE = 1, DV
CC
= 3.6 V, SVMHFP = 0 200 nA
SVMHE = 1, DV
CC
= 3.6 V, SVMHFP = 1 1.5 µA
SVMHE = 1, SVSMHRRL = 0 1.63 1.73 1.83
SVMHE = 1, SVSMHRRL = 1 1.83 1.93 2.03
SVMHE = 1, SVSMHRRL = 2 2.03 2.13 2.23
SVMHE = 1, SVSMHRRL = 3 2.13 2.23 2.33
V
(SVMH)
SVM
H
on or off voltage level
(1)
SVMHE = 1, SVSMHRRL = 4 2.28 2.40 2.53 V
SVMHE = 1, SVSMHRRL = 5 2.55 2.70 2.81
SVMHE = 1, SVSMHRRL = 6 2.88 3.02 3.18
SVMHE = 1, SVSMHRRL = 7 2.88 3.02 3.18
SVMHE = 1, SVMHOVPE = 1 3.77
SVMHE = 1, dV
DVCC
/dt = 10 mV/µs, SVMHFP = 1 2.5
t
pd(SVMH)
SVM
H
propagation delay µs
SVMHE = 1, dV
DVCC
/dt = 1 mV/µs, SVMHFP = 0 20
SVMHE = 0 → 1, dV
DVCC
/dt = 10 mV/µs,
12.5
SVMHFP = 1
t
(SVMH)
SVM
H
on or off delay time µs
SVMHE = 0 → 1, dV
DVCC
/dt = 1 mV/µs,
100
SVMHFP = 0
(1) The SVM
H
settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) on recommended settings and use.
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 71