Datasheet

ECCN 5E002 TSPA - Technology / Software Publicly Available
MSP430F677x , MSP430F676x , MSP430F674x
SLAS768D –SEPTEMBER 2012–REVISED DECEMBER 2013 www.ti.com
Table 18. DMA Trigger Assignments
(1)
(continued)
CHANNEL
TRIGGER
0 1 2
18 UCA1RXIFG UCA1RXIFG UCA1RXIFG
19 UCA1TXIFG UCA1TXIFG UCA1TXIFG
20 UCA2RXIFG UCA2RXIFG UCA2RXIFG
21 UCA2TXIFG UCA2TXIFG UCA2TXIFG
22 UCB0RXIFG0 UCB0RXIFG0 UCB0RXIFG0
23 UCB0TXIFG0 UCB0TXIFG0 UCB0TXIFG0
24 ADC10IFG0 ADC10IFG0 ADC10IFG0
25 UCA3RXIFG UCA3RXIFG UCA3RXIFG
26 UCA3TXIFG UCA3TXIFG UCA3TXIFG
27 UCB1RXIFG0 UCB1RXIFG0 UCB1RXIFG0
28 UCB1TXIFG0 UCB1TXIFG0 UCB1TXIFG0
29 MPY ready MPY ready MPY ready
30 DMA2IFG DMA0IFG DMA1IFG
31 Reserved Reserved Reserved
CRC16 (Link to User's Guide)
The CRC16 module produces a signature based on a sequence of entered data values and can be used for data
checking purposes. The CRC16 module signature is based on the CRC-CCITT standard.
Hardware Multiplier (Link to User's Guide)
The multiplication operation is supported by a dedicated peripheral module. The module performs operations with
32-bit, 24-bit, 16-bit, and 8-bit operands. The module is capable of supporting signed and unsigned multiplication
as well as signed and unsigned multiply and accumulate operations.
AES128 Accelerator (Link to User's Guide)
The AES accelerator module performs encryption and decryption of 128-bit data with 128-bit keys according to
the Advanced Encryption Standard (AES) (FIPS PUB 197) in hardware.
Enhanced Universal Serial Communication Interface (eUSCI) (Links to User's Guide: UART Mode,
SPI Mode, I2C Mode)
The eUSCI module is used for serial data communication. The eUSCI module supports synchronous
communication protocols such as SPI (3 or 4 pin) and I
2
C, and asynchronous communication protocols such as
UART, enhanced UART with automatic baudrate detection, and IrDA.
The eUSCI_An module provides support for SPI (3 or 4 pin), UART, enhanced UART, and IrDA.
The eUSCI_Bn module provides support for SPI (3 or 4 pin) and I2C.
Four eUSCI_A and two eUSCI_B module are implemented in MSP430F677x devices.
ADC10_A (Link to User's Guide)
The ADC10_A module supports fast, 10-bit analog-to-digital conversions. The module implements a 10-bit SAR
core, sample select control, reference generator and a conversion results buffer. A window comparator with a
lower and upper limit allows CPU independent result monitoring with three window comparator interrupt flags.
SD24_B (Link to User's Guide)
The SD24_B module integrates up to seven independent 24-bit sigma-delta A/D converters. Each converter is
designed with a fully differential analog input pair and programmable gain amplifier input stage. Also the
converters are based on second-order over-sampling sigma-delta modulators and digital decimation filters. The
decimation filters are comb type filters with selectable oversampling ratios of up to 1024.
38 Submit Documentation Feedback Copyright © 2012–2013, Texas Instruments Incorporated