Datasheet

ECCN 5E002 TSPA - Technology / Software Publicly Available
CC430F6137, CC430F6135, CC430F6127, CC430F6126, CC430F6125
CC430F5137, CC430F5135, CC430F5133
www.ti.com SLAS554H –MAY 2009–REVISED SEPTEMBER 2013
PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVSLE = 0, PMMCOREV = 2 0 nA
I
(SVSL)
SVS
L
current consumption SVSLE = 1, PMMCOREV = 2, SVSLFP = 0 200 nA
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1 1.5 µA
SVSLE = 1, dV
CORE
/dt = 10 mV/µs,
2.5
SVSLFP = 1
t
pd(SVSL)
SVS
L
propagation delay µs
SVSLE = 1, dV
CORE
/dt = 1 mV/µs,
20
SVSLFP = 0
SVSLE = 0 → 1, dV
CORE
/dt = 10 mV/µs,
12.5
SVSLFP = 1
t
(SVSL)
SVS
L
on or off delay time µs
SVSLE = 0 → 1, dV
CORE
/dt = 1 mV/µs,
100
SVSLFP = 0
PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVMLE = 0, PMMCOREV = 2 0 nA
I
(SVML)
SVM
L
current consumption SVMLE= 1, PMMCOREV = 2, SVMLFP = 0 200 nA
SVMLE= 1, PMMCOREV = 2, SVMLFP = 1 1.5 µA
SVMLE = 1, dV
CORE
/dt = 10 mV/µs,
2.5
SVMLFP = 1
t
pd(SVML)
SVM
L
propagation delay µs
SVMLE = 1, dV
CORE
/dt = 1 mV/µs,
20
SVMLFP = 0
SVMLE = 0 → 1, dV
CORE
/dt = 10 mV/µs,
12.5
SVMLFP = 1
t
(SVML)
SVM
L
on or off delay time µs
SVMLE = 0 → 1, dV
CORE
/dt = 1 mV/µs,
100
SVMLFP = 0
Wake Up From Low Power Modes and Reset
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
PMMCOREV = SVSMLRRL = n f
MCLK
≥ 4.0 MHz 5
Wake-up time from LPM2, LPM3, or
t
WAKE-UP-FAST
(where n = 0, 1, 2, or 3), µs
LPM4 to active mode
(1)
f
MCLK
< 4.0 MHz 6
SVSLFP = 1
PMMCOREV = SVSMLRRL = n
Wake-up time from LPM2, LPM3 or
t
WAKE-UP-SLOW
(where n = 0, 1, 2, or 3), 150 165 µs
LPM4 to active mode
(2)
SVSLFP = 0
Wake-up time from RST or BOR
t
WAKE-UP-RESET
2 3 ms
event to active mode
(3)
(1) This value represents the time from the wake-up event to the first active edge of MCLK. The wake-up time depends on the performance
mode of the low-side supervisor (SVS
L
) and low side monitor (SVM
L
). Fastest wake-up times are possible with SVS
L
and SVM
L
in full
performance mode or disabled when operating in AM, LPM0, and LPM1. Various options are available for SVS
L
and SVM
L
while
operating in LPM2, LPM3, and LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the CC430 Family
User's Guide (SLAU259).
(2) This value represents the time from the wake-up event to the first active edge of MCLK. The wake-up time depends on the performance
mode of the low-side supervisor (SVS
L
) and low side monitor (SVM
L
). In this case, the SVS
L
and SVM
L
are in normal mode (low current)
mode when operating in AM, LPM0, and LPM1. Various options are available for SVS
L
and SVM
L
while operating in LPM2, LPM3, and
LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the CC430 Family User's Guide (SLAU259).
(3) This value represents the time from the wake-up event to the reset vector execution.
Copyright © 2009–2013, Texas Instruments Incorporated Submit Documentation Feedback 55
Product Folder Links: CC430F6137 CC430F6135 CC430F6127 CC430F6126 CC430F6125 CC430F5137
CC430F5135 CC430F5133