Datasheet

Spectrum Analyzer Software Reference

www.ti.com

Figure 6. Spectrum Analyzer GUI

4.1 RF Settings

The most important part of using a Spectrum Analyzer is the selection of measurement parameters. All of

these settings can be made in the RF Settings tab. The following sections describe the options available in

this tab.

Changes to settings can be made while a measurement is running. After all settings are adjusted in the

RF Settings tab, apply the settings by clicking the Start button. New measurement data and updated RF

settings are now displayed in the graph.

NOTE: Frequency parameters shown in the graph may be slightly different from the parameters that

were set in the RF Settings tab. This is caused by the frequency resolution of the hardware.

Spectrum Analyzer (MSP-SA430-SUB1GHZ) SLAU371A– September 2011– Revised November 2011

Submit Documentation Feedback