Datasheet

PRODUCTPREVIEW
MSP432P401R, MSP432P401M
SLAS826 –MARCH 2015 www.ti.com
PSS, SVSMH (continued)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 0,
1.47 1.54 1.62
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 1,
1.5 1.57 1.65
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 2,
1.55 1.62 1.71
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 3,
2 2.09 2.18
DC (dDV
CC
/dt < 1V/s) trimmed
SVSM
H
threshold level; Low
V
SVSMH-,LP
V
Power Mode [falling DV
CC
]
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 4,
2.2 2.3 2.4
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 5,
2.4 2.51 2.62
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 6,
2.7 2.82 2.94
DC (dDV
CC
/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 7,
2.87 3.0 3.13
DC (dDV
CC
/dt < 1V/s) trimmed
V
SVSMH_hys
SVSM
H
hysteresis 15 mV
SVS
H
propagation delay, high- SVSMHOFF = 0, SVSMHLP = 0, very fast
2 10
performance mode dV
DVCC
/dt
t
PD,SVSMH
μs
SVS
H
propagation delay, low- SVSMHOFF = 0, SVSMHLP = 1, very fast
15 100
power mode dV
DVCC
/dt
SVSMHOFF = 1 → 0
t
(SVSMH)
SVSM
H
on or off delay time 17 40 μs
SVSMHLP = 0
(1)
(1) If the SVSMH is kept disabled in active mode and is enabled before entering a low-power mode of the device (LPM3, LPM4, LPM3.5, or
LPM4.5) care should be taken that sufficient time has elapsed since enabling of the module before entry into the device low-power
mode to allow for successful wakeup of SVSMH module as per the SVSMH on or off delay time specification. Otherwise, SVSMH may
trip, causing device to get a Reset & wakeup from the Low Power Mode.
40 Specifications Copyright © 2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP432P401R MSP432P401M