User manual

Suggested Reading

www.ti.com

Table 2. Bill of Materials (BOM) (continued)

Numbe

Pos. Ref Des r per Description

Board

R27, R28, R29,

40 R30, R31, R32, 8 330

R36, R37

41 R34 0 0R

42 R35 1 470k

43 RF1, RF2 2

44 RF3 0 eZ-RF connector for EXP-F5438 board

45 RF_PWR 1 RF_PWR

46 S1, S2 2

47 RST 1

48 SV1, SV2 2+[2] 12-pin header, TH

49 U$2 1 USB_MINI_B5

50 U1 1 F1612-PM64

51 U2 1 TPS77301DGK

52 U3 1 TUSB3410VF

53 U4 1 TPD2E001

54 U5 1 CAT24FC32UI

55 U6 1 ADXL335 accelerometer

4 Suggested Reading

The primary sources of MSP430 information are the device-specific data sheets and user's guides. The

most up-to-date versions of those documents can be found at the Texas Instruments MSP430 page

www.ti.com/msp430.

Visit www.ti.com/fram to find the latest information on TI's FRAM family.

To get an inside view of the CCS and IAR IDEs, download the latest version from the MSP430 page and

read the included user's guides and documentation in the installation folder.

Documents describing the IAR tools (Workbench/C-SPY, the assembler, the C compiler, the linker, and

the library) are located in common\doc and 430\doc. All necessary CCS documents can be found in

msp430\doc inside the CCS installation path. The Code Composer Studio v4.2 for MSP430™ User’s

Guide (SLAU157) and IAR Embedded Workbench Version 3+ for MSP430™ User's Guide (SLAU138)

include detailed information on how to set up a project for the MSP430 using CCS or IAR. They are

included in most of the IDE releases and on the MSP430 page.

5 References

1. MSP430FR5739 data sheet (SLAS639)

2. MSP430F2274 data sheet (SLAS504)

3. MSP430FR57xx Family User's Guide (SLAU272)

MSP-EXP430FR5739 FRAM Experimenter Board SLAU343B– May 2011–Revised February 2012

Submit Documentation Feedback