Datasheet

MSP430FR4133, MSP430FR4132, MSP430FR4131
www.ti.com SLAS865B –OCTOBER 2014–REVISED AUGUST 2015
Table 6-49. ADC Registers (Base Address: 0700h)
REGISTER DESCRIPTION REGISTER OFFSET
ADC control register 0 ADCCTL0 00h
ADC control register 1 ADCCTL1 02h
ADC control register 2 ADCCTL2 04h
ADC window comparator low threshold ADCLO 06h
ADC window comparator high threshold ADCHI 08h
ADC memory control register 0 ADCMCTL0 0Ah
ADC conversion memory register ADCMEM0 12h
ADC interrupt enable ADCIE 1Ah
ADC interrupt flags ADCIFG 1Ch
ADC interrupt vector word ADCIV 1Eh
6.12 Identification
6.12.1 Revision Identification
The device revision information is shown as part of the top-side marking on the device package. The
device-specific errata sheet describes these markings. For links to all of the errata sheets for the devices
in this data sheet, see Section 8.2.
The hardware revision is also stored in the Device Descriptor structure in the Info Block section. For
details on this value, see the "Hardware Revision" entries in Section 6.10.
6.12.2 Device Identification
The device type can be identified from the top-side marking on the device package. The device-specific
errata sheet describes these markings. For links to all of the errata sheets for the devices in this data
sheet, see Section 8.2.
A device identification value is also stored in the Device Descriptor structure in the Info Block section. For
details on this value, see the "Device ID" entries in Section 6.10.
6.12.3 JTAG Identification
Programming through the JTAG interface, including reading and identifying the JTAG ID, is described in
detail in the MSP430 Programming Via the JTAG Interface User's Guide (SLAU320).
Copyright © 2014–2015, Texas Instruments Incorporated Detailed Description 77
Submit Documentation Feedback
Product Folder Links: MSP430FR4133 MSP430FR4132 MSP430FR4131