Datasheet

The following pins are exposed at the BoosterPack connector.
+3.3V
P8.1
P2.7
P1.1
P8.0
P5.1
P2.5
P8.2
P8.3
P1.0
UART
RX
TX
Analog In
Analog In
SPI CLK
I2C*
SCL
SDA
A9
A1
UCA0RXD
UCA0SOMI
A0
UCA0TXD
UCA0SIMO
L31
SMCLK
A8
L33
UCB0CLK
L29
TA1CLK
TA1.2
BoosterPack
Standard
MSP-EXP430FR4133 Pin Map
+3.3V
GPIO (!)
GPIO (!)
(!)
(!)
(!)
(!)
AC LK
GND
P1.7
P1.6
RST
P5.2
P1.3
P1.4
P1.5
P5.3
A7
TA0.1
TDO
L34
UCB0SDA
L35
UCB0SCL
UCB0SOMI
A4
MCLK
TCK
A5
TMS
TA0CLK
A6
TA0.2
TDI
TCLK
A3
UCB0STE
UCB0SIMO
SPI
MOSI
MISO
SPI CS Wireless
SPI CS Display
SPI CS Other
BoosterPack Standard
MSP-EXP430FR4133 Pin Map
GND
RST
PWM Out
GPIO (!)
GPIO (!)
GPIO (!)
GPIO (!)
GPIO (!)
(!)
(!)
(!)
(!)
(!)
UCA0STE
P5.0
L32
GPIO**
Also shown are functions that map with the BoosterPack standard.
* Note that to comply with the I C channels of the BoosterPack standard, a software-emulated I C must be used.
** Some LaunchPads do not 100% comply with the standard, please check your LaunchPad to ensure compatability
(!) Denotes I/O pins that are interrupt-capable.
2 2
Hardware www.ti.com
16
SLAU595A–October 2014–Revised July 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
MSP430FR4133 LaunchPad™ Development Kit (MSP ‑ EXP430FR4133)
2.7 BoosterPack Pinout
The LaunchPad adheres to the 20-pin LaunchPad pinout standard. A standard was created to aid
compatibility between LaunchPad and BoosterPack tools across the TI ecosystem.
The 20-pin standard is compatible with the 40-pin standard that is used by other LaunchPads like the
MSP‑EXP430F5529LP. This allows some subset of functionality of 40-pin BoosterPacks to be used with
20-pin LaunchPads.
While most BoosterPacks are compliant with the standard, some are not. The MSP-EXP430FR4133
LaunchPad is compatible with all 20-pin BoosterPacks that are compliant with the standard. If the reseller
or owner of the BoosterPack does not explicitly indicate compatibility with the MSP-EXP430FR4133
LaunchPad, compare the schematic of the candidate BoosterPack with the LaunchPad to ensure
compatibility. Keep in mind that sometimes conflicts can be resolved by changing the MSP430FR4133
device pin function configuration in software. More information about compatibility can also be found at
http://www.ti.com/launchpad.
Figure 10 shows the 20-pin pinout of the MSP430FR4133 LaunchPad.
Note that software's configuration of the pin functions plays a role in compatibility. The LaunchPad side of
the dashed line in Figure 10 shows all of the functions for which the MSP430FR4133 device's pins can be
configured. This can also be seen in the MSP430FR4133 data sheet. The BoosterPack side of the dashed
line shows the standard. The LaunchPad function whose color matches the BoosterPack function shows
the specific software-configurable function by which the MSP430FR4133 LaunchPad adheres to the
standard.
Figure 10. LaunchPad to BoosterPack Connector Pinout