Datasheet

Target Device
MSP430FR4133
Crystal
32.768 kHz
Micro-B
USB
3.3-VLDO
ESD
Protection
Debug
MCU
LEDs
Red, Green
Crystal
4 MHz
UART/SBW to Target
User Interface
2 Buttons and 2 LEDs
20-pin LaunchPad
standard headers
Power to Target
Reset
button
Segmented LCD
EnergyTrace
Hardware www.ti.com
6
SLAU595A–October 2014–Revised July 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
MSP430FR4133 LaunchPad™ Development Kit (MSP ‑ EXP430FR4133)
2.1 Block Diagram
Figure 3 shows the block diagram.
Figure 3. Block Diagram
2.2 Hardware Features
2.2.1 MSP430FR4133
The MSP430FR4133 is the next device in TI's new ULP FRAM technology platform. FRAM is a cutting
edge memory technology, combining the best features of flash and RAM into one nonvolatile memory.
Device features include:
• 1.8-V to 3.6-V operation
• Up to 16-MHz system clock and 8-MHz FRAM access
• 16KB of nonvolatile FRAM
• Industry's lowest-power LCD controller
• IR modulation logic
• Two timer blocks and up to three serial interfaces (SPI, UART, or I
2
C)
• Analog: 10-channel 10-bit differential ADC
• Digital: RTC, CRC