Datasheet

{
eZ-FET on-board emulator
Enables debugging/programming as
well as communication back to the
PC. The eZ-FET can also provide
power to the target MCU.
Introducing EnergyTrace Technology
TM
Real-time power consumption readings and
state updates from the MSP430FR4133
MCU, including CPU and peripheral state
are viewable through the EnergyTrace GUI
Jumpers to isolate emulator
from target MCU (J101)
- Back-channel UART to PC
(RTS, CTS, RXD, TXD)
- Spy-Bi -Wire debug (SBWTDIO/SBWTCK)
- Power (5V, 3V3, and GND)
20-pin BoosterPack
plug-in module connector
(J1 and J2)
{
Button/Switch
S2
User LEDs
LED1, LED2
Button/Switch
S1
Segmented LCD Display
- 6 alphanumeric characters
- 6 symbols for various applications
- Ultra-low power display
MSP430FR4133 Microcontroller
MSP1
Reset
{
www.ti.com Hardware
5
SLAU595A–October 2014–Revised July 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
MSP430FR4133 LaunchPad™ Development Kit (MSP ‑ EXP430FR4133)
2 Hardware
Figure 2 shows an overview of the MSP-EXP430FR4133 hardware.
Figure 2. MSP-EXP430FR4133 Overview