Datasheet
MAX3386E
www.ti.com
SLLS659B –MAY 2006– REVISED MARCH 2011
TERMINAL FUNCTIONS (continued)
TERMINAL
DESCRIPTION
NAME NO.
V
CC
19 3-V to 5.5-V supply voltage
Powerdown input
PWRDWN 20 L = Powerdown
H = Normal operation
Absolute Maximum Ratings
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
to GND –0.3 6 V
V
L
to GND –0.3 V
CC
+ 0.3 V
V+ to GND –0.3 7 V
V– to GND 0.3 –7 V
V+ + |V–|
(2)
13 V
DIN, PWRDWN to GND –0.3 6
V
I
Input voltage V
RIN to GND ±25
DOUT to GND ±13.2
V
O
Output voltage V
ROUT –0.3 V
L
+ 0.3
Short-circuit duration DOUT to GND Continuous
T
A
= 70°C, 20-pin TSSOP
Continuous power dissipation 559 mW
(derate 7 mW/°C above 70°C)
T
J
Junction temperature 150 °C
T
stg
Storage temperature range –65 150 °C
Lead temperature (soldering, 10 s) 300 °C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(2) V+ and V– can have maximum magnitudes of 7 V, but their absolute difference cannot exceed 13 V.
Recommended Operating Conditions
MIN MAX UNIT
V
CC
Supply voltage 3 5.5 V
V
L
Supply voltage 2.25 V
CC
V
V
L
= 3 V or 5.5 V 0.8
Input logic threshold low DIN, PWRDWN V
V
L
= 2.3 V 0.6
V
L
= 5.5 V 2.4
Input logic threshold high DIN, PWRDWN V
L
= 3 V 2.0 V
V
L
= 2.7 V 1.4
MAX3386ECPWR 0 70
Operating temperature °C
MAX3386EIPWR –40 85
Receiver input voltage –25 25 V
Electrical Characteristics
over operating free-air temperature range, V
CC
= V
L
= 3 V to 5.5 V, C1–C4 = 0.1 μF (tested at 3.3 V ± 10%), C1 = 0.047 μF,
C2–C4 = 0.33 μF (tested at 5 V ± 10%) (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
DC Characteristics (V
CC
= 3.3 V or 5 V, T
A
= 25°C)
Powerdown supply current PWRDWN = GND, All inputs at V
CC
or GND 1 10 μA
(1) Typical values are at V
CC
= V
L
= 3.3 V, T
A
= 25°C.
Copyright © 2006–2011, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): MAX3386E