User's Guide

SZZC019G
EVM Use Restrictions and Warnings:
EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO
EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM,
including without limitation any warning or restriction notices. The notices contain important safety information related to, for example, temperatures and
voltages.
Safety-Related Warnings and Restrictions:
User shall operate the EVM within TI’s recommended specifications and environmental considerations stated in the user guide, other available
documentation provided by TI, and any other applicable requirements and employ reasonable and customary safeguards. Exceeding the specified
performance ratings and specifications (including but not limited to input and output voltage, current, power, and environmental ranges) for the EVM may
cause personal injury or death, or property damage. If there are questions concerning performance ratings and specifications, User should contact a TI
field representative prior to connecting interface electronics including input power and intended loads. Any loads applied outside of the specified output
range may also result in unintended and/or inaccurate operation and/or possible permanent damage to the EVM and/or interface electronics. Please
consult the EVM user guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field
representative. During normal operation, even with the inputs and outputs kept within the specified allowable ranges, some circuit components may have
elevated case temperatures. These components include but are not limited to linear regulators, switching transistors, pass transistors, current sense
resistors, and heat sinks, which can be identified using the information in the associated documentation. When working with the EVM, please be aware
that the EVM may become very warm.
EVMs are intended solely for use by technically qualified, professional electronics experts who are familiar with the dangers and application risks
associated with handling electrical mechanical components, systems, and subsystems. User assumes all responsibility and liability for proper and safe
handling and use of the EVM by User or its employees, affiliates, contractors or designees. User assumes all responsibility and liability to ensure that any
interfaces (electronic and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely limit accessible
leakage currents to minimize the risk of electrical shock hazard. User assumes all responsibility and liability for any improper or unsafe handling or use of
the EVM by User or its employees, affiliates, contractors or designees.
User assumes all responsibility and liability to determine whether the EVM is subject to any applicable international, federal, state, or local laws and
regulations related to User’s handling and use of the EVM and, if applicable, User assumes all responsibility and liability for compliance in all respects with
such laws and regulations. User assumes all responsibility and liability for proper disposal and recycling of the EVM consistent with all applicable
international, federal, state, and local requirements.
TI Worldwide Technical Support:
TI Semiconductor Product Information Center Home Page: support.ti.com
TI E2E Community Home Page: e2e.ti.com
PRODUCT INFORMATION CENTERS
• Toll Free numbers are not accessible in all countries and on IP and mobile phones. If you experience technical difficulties please use the
regional email links on this page to contact technical support.
• TI regional Product Information Centers have been established to assist you with your technical questions about semiconductor products. For
TI-RFid & Contactless Commerce Technical Support Information, please see these regional contact options.
•
• Americas
- 512-434-1560
•
• Asia/Pacific
- Australia: 1-800-999-084
- China: 800-820-8682
- Hong Kong: 800-96-5941
- India: [phone]
- Korea: 080-551-2804
- Singapore: 800-886-1028
- Taiwan: 0800-006-800
• Europe, Middle East, Africa
- European Free Call 00800-ASK-TEXAS (00800 275 83927)
- International Call [phone]
- Russian Support [phone]
• Japan
- Fax International: [phone]
- Fax Domestic: 0120-81-0036
- Phone Domestic Toll-Free : 0120-92-3326
Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 USA
Copyright 2009 - 2017, Texas Instruments Incorporated