Datasheet

PSPAD CUSTOMIZATION

Once you run the PSPad editor, you should customize the editor for LP5523 as follows:

Select Settings menu > Highlighter settings.

Select Specification tab. See Figure 1.

On the left (highlighter) list, click on one of bolded highlighters (marked with <not assigned> -tab).

On the right side is list of user highlighters, select the Lysti highlighter and click on it (see Figure 1). Click on ‘Apply’ to confirm

this action.

Also set the compiler search path and parameters for the LASM.exe, as shown in Figure 2. You may need to replace the shown

filepath C:\data\LP5523\LASM\LASM.exe with your actual path. Tag the Capture Program Output Window as shown in Figure 2.

Accept highlighter settings by clicking ‘OK’. Finally, in the main window show the LOG window by pressing CTRL + L. All software

needed should be now ready for writing and assembling the first program. Note: The maximum length of a source code line is 140

characters. Lines that are longer than 140 are not assembled correctly.

30187013

FIGURE 1. PSPad Highlighter Specification Settings for LP5523

AN-2227 - LP5523 Evaluation Kit