Datasheet
USB interface ADC jumpers
www.ti.com
Using the Evaluation Software
The USB interface also contains ADCs to measure the output voltage of the regulators. To do so, simply
connect the USB interface ADC jumpers shown in Figure 8. To measure the external voltages again,
simply click the “Measure” button on the GUI.
Figure 7. Regulator Output Voltage Selection Interface
Figure 8. USB Interface ADC Jumpers
7
SNVA233A–September 2007–Revised April 2013 AN-1619 Evaluation Kit for LP3907 — Programmable Power Management
Unit with 1
2
C Compatible Interface
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated