Datasheet

SS/TR
INH/UVLO
VOUT
STSEL
SS/TR
INH/UVLO
VOUT
STSEL
V
OUT1
R1
R2
V
OUT2
( )
( )
´
= W
OUT2
V 12.6
R1 k
0.8
( )
( )
´
= W
-
OUT2
0.8 R1
R2 k
V 0.8
STSEL
INH/UVLO
PWRGD
VOUT
V
OUT1
STSEL
INH/UVLO
PWRGD
VOUT
V
OUT2
LMZ31503
SNVS992 –JULY 2013 www.ti.com
Sequencing (SS/TR)
Many of the common power supply sequencing methods can be implemented using the SS/TR, INH and
PWRGD pins. The sequential method is illustrated in Figure 36 using two LMZ31503 devices. The PWRGD pin
of the first device is coupled to the INH pin of the second device which enables the second power supply once
the primary supply reaches regulation. Figure 37 shows sequential turn-on waveforms of two LMZ31503 devices.
Figure 36. Sequencing Schematic Figure 37. Sequencing Waveforms
Simultaneous power supply sequencing can be implemented by connecting the resistor network of R1 and R2
shown in Figure 38 to the output of the power supply that needs to be tracked or to another voltage reference
source. Figure 39 shows simultaneous turn-on waveforms of two LMZ31503 devices. Use Equation 2 and
Equation 3 to calculate the values of R1 and R2.
(2) (3)
Figure 38. Simultaneous Tracking Schematic Figure 39. Simultaneous Tracking Waveforms
22 Submit Documentation Feedback Copyright © 2013, Texas Instruments Incorporated
Product Folder Links: LMZ31503