Datasheet

LMZ22010

SNVS687G –MARCH 2011–REVISED OCTOBER 2013

www.ti.com

– For all other I/O pads use a 1:1 ratio between the aperture and the land pattern recommendation

• Solder Paste – Use a standard SAC Alloy such as SAC 305, type 3 or higher

• Stencil Thickness – 0.125 to 0.15mm

• Reflow - Refer to solder paste supplier recommendation and optimized per board size and density

• Maximum number of reflows allowed is one

Figure 60. Sample Reflow Profile

Table 2.

Max Temp Reached Time Above Reached Time Above Reached Time Above Reached

Probe

(°C) Max Temp 235°C 235°C 245°C 245°C 260°C 260°C

#1 242.5 6.58 0.49 6.39 0.00 – 0.00 –

#2 242.5 7.10 0.55 6.31 0.00 7.10 0.00 –

#3 241.0 7.09 0.42 6.44 0.00 – 0.00 –

Product Folder Links: LMZ22010