Datasheet

LMV710-N, LMV711-N, LMV715-N
SNOS519J –APRIL 2000–REVISED MARCH 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
ESD Tolerance
(3)
Machine Model 100V
Human Body Model 2000V
Differential Input Voltage ± Supply Voltage
Voltage at Input/Output Pin (V
+
) + 0.4V
(V
−
) − 0.4V
Supply Voltage (V
+
- V
−
) 5.5V
Output Short Circuit to V
+ (4)
Output Short Circuit to V
− (5)
Current at Input Pin ± 10 mA
Mounting Temp.
Infrared or Convection (20 sec) 235°C
Storage Temperature Range −65°C to 150°C
Junction Temperature (T
JMAX
) 150°C
(6)
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human body model, 1.5 kΩ in series with 100 pF. Machine model, 0Ω in series with 100 pF.
(4) Shorting circuit output to V
+
will adversely affect reliability.
(5) Shorting circuit output to V
−
will adversely affect reliability.
(6) The maximum power dissipation is a function of T
J(MAX)
, θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient
temperature is P
D
= (T
J(MAX)
- T
A
)/θ
JA
. All numbers apply for packages soldered directly into a PC board.
Operating Ratings
(1)
Supply Voltage 2.7V to 5.0V
Temperature Range −40°C to 85°C
Thermal Resistance (θ
JA
)
DBV0005A package, 5-Pin SOT-23 265 °C/W
DBV0006A package, 6-Pin SOT-23 265 °C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
2.7V Electrical Characteristics
Unless otherwise specified, all limits ensured for T
J
= 25°C. V
+
= 2.7V, V
−
= 0V, V
CM
= 1.35V and R
L
> 1 MΩ. Boldface limits
apply at the temperature extremes.
Parameter Test Conditions Typ
(1)
Limits
(2)
Units
V
OS
Input Offset Voltage V
CM
= 0.85V and V
CM
= 1.85V 0.4 3 mV
3.2 max
I
B
Input Bias Current 4 pA
CMRR Common Mode Rejection Ratio 0 ≤ V
CM
≤ 2.7V 75 50 dB
45 min
PSRR Power Supply Rejection Ratio 2.7V ≤ V
+
≤ 5V, 110 70 dB
V
CM
= 0.85V 68 min
2.7V ≤ V
+
≤ 5V, 95 70 dB
V
CM
= 1.85V 68 min
(1) Typical values represent the most likely parametric norm.
(2) All limits are specified by testing or statistical analysis.
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LMV710-N LMV711-N LMV715-N