Datasheet

LMV321-N, LMV321-N-Q1, LMV358-N, LMV358-N-Q1
LMV324-N, LMV324-N-Q1
www.ti.com SNOS012I –AUGUST 2000–REVISED FEBRUARY 2013
5V AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for T
J
= 25°C, V
+
= 5V, V
−
= 0V, V
CM
= 2.0V, V
O
= V
+
/2 and R
L
> 1 MΩ.
Boldface limits apply at the temperature extremes.
Symbol Parameter Conditions Min Typ Max Units
(1) (2) (1)
SR Slew Rate
(3)
1 V/µs
GBWP Gain-Bandwidth Product C
L
= 200 pF 1 MHz
Φ
m
Phase Margin 60 Deg
G
m
Gain Margin 10 dB
e
n
Input-Referred Voltage Noise f = 1 kHz 39
i
n
Input-Referred Current Noise f = 1 kHz 0.21
(1) All limits are guaranteed by testing or statistical analysis.
(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary
over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on
shipped production material.
(3) Connected as voltage follower with 3V step input. Number specified is the slower of the positive and negative slew rates.
CONNECTION DIAGRAM
5-Pin SC70/SOT23 8-Pin SOIC/MSOP 14-Pin SOIC/TSSOP
Figure 1. Top View Figure 2. Top View Figure 3. Top View
Devices with an asterisk (*) are future products. Please contact the factory for availability.
Automotive Grade (Q) product incorporates enhanced manufacturing and support processes for the automotive
market, includingdefect detection methodologies. Reliability qualification is compliant with the requirements and
temperature grades defined in the AEC Q100 standard. Automotive Grade products are identified with the letter
Q. Fully compliant PPAP documentation is available.For more information go to
http://www.national.com/automotive.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LMV321-N LMV321-N-Q1 LMV358-N LMV358-N-Q1 LMV324-N LMV324-N-Q1