Datasheet

LMV116, LMV118
SNOSA87B –OCTOBER 2003–REVISED MAY 2013 www.ti.com
Another important parameter, is the component values selection. Choosing large valued external resistors, will
effect the closed loop behavior of the stage because of the interaction of these resistors with parasitic
capacitances. These capacitors could be inherent to the device or a by-product of the board layout and
component placement. Either way, keeping the resistor values lower, will diminish this interaction. On the other
hand, choosing very low value resistors could load down nodes and will contribute to higher overall power
dissipation.
TI suggests the following evaluation boards as a guide for high frequency layout and as an aid in device testing
and characterization:
Device Package Evaluation Board PN
LMV116 SOT-23-5 CLC730068
LMV118 SOT-23-6 CLC730116
These free evaluation boards are shipped when a device sample request is placed with TI.
14 Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMV116 LMV118