Datasheet

LMP90100
www.ti.com SNAS510P –JANUARY 2011–REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2)
Analog Supply Voltage, VA -0.3V to 6.0V
Digital I/O Supply Voltage, VIO -0.3V to 6.0V
Reference Voltage, VREF -0.3V to VA+0.3V
Voltage on Any Analog Input Pin to GND
(3)
-0.3V to VA+0.3V
Voltage on Any Digital Input PIN to GND
(3)
-0.3V to VIO+0.3V
Voltage on SDO
(3)
-0.3V to VIO + 0.3V
Input Current at Any Pin
(3)
5mA
Output Current Source or Sink by SDO 3mA
Total Package Input and Output Current 20mA
ESD Susceptibility
Human Body Model (HBM) 2500V
Machine Models (MM) 200V
Charged Device Model (CDM) 1250V
Junction Temperature (T
JMAX
) +150°C
Storage Temperature Range –65°C to +150°C
For soldering specifications: see product folder at www.ti.com and http://www.ti.com/lit/SNOA549.
(1) All voltages are measured with respect to GND, unless otherwise specified
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(3) When the input voltage (VIN) exceeds the power supply (VIN < GND or VIN > VA), the current at that pin must be limited to 5mA and
VIN has to be within the Absolute Maximum Rating for that pin. The 20 mA package input current rating limits the number of pins that
can safely exceed the power supplies with current flow to four pins.
Operating Ratings
Analog Supply Voltage, VA +2.85V to 5.5V
Digital I/O Supply Voltage, VIO +2.7V to 5.5V
Full Scale Input Range, VIN ±VREF / PGA
Reference Voltage, VREF +0.5V to VA
T
MIN
= –40°C
Temperature Range for Electrical Characteristics
T
MAX
= +125°C
Operating Temperature Range –40°C ≤ T
A
≤ +125°C
Junction to Ambient Thermal Resistance (θ
JA
)
(1)
41°C/W
(1) The maximum power dissipation is a function of T
J(MAX)
AND θ
JA
. The maximum allowable power dissipation at any ambient
temperature is P
D
= (T
J(MAX)
- T
A
) / θ
JA
.
Copyright © 2011–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: LMP90100